The Full Cutoff Utility Series is designed for years of hassle-free, high-performance operation. The three traditional luminaire designs bring a classic historical look while providing state-of-the-art LED optics for maximum energy savings and long life. Utility Series features such as he flagship "M-housing" make maintenance fast and easy with tool-less access to internal components.

The optical system consists of 63 high output LEDs with a dedicated thermal management system and glass cover lens to protect the critical LED & electronic components. The entire optical assembly has been optimized to maximize pole spacings while maintaining uniformity & control. Utilizes a one-piece silicon gasket with a totally sealed, IP Rated optical chamber. Two distributions are available, designed for asymmetric and symmetric full cutoff distributions.

The robust cast aluminum housing provides a sealed enclosure for the electronic driver and LED array. All three models utilize heavy duty pinned hinges and latches for access to the top optical compartment and the lower driver housing. A slipfitter will accept a 3" high by 27/8" to 31/8" O.D. pole tenon.

Cast of aluminum, the M-housing door swings open via a heavy duty tool-less latch and provides access to the LED Driver and Photocontrol which are mounted directly onto the door. Also accessible through the housing door is the heavy duty surge protection device.

(Refer to Data Sheet for specific operating characteristics) 50 or 60 Hz voltage sensing 120 - 277V >90% efficient electronic. Potted for increased thermal management. Removable through access door. 70W - 350mah and 105W - 525mah available.

The luminaire is finished with polyester powder paint applied after a pretreatment process to provide maximum durability. The finish shall pass the 1000 hour salt fog test per ATSM standard B117.

The luminaire is UL listed as suitable for wet locations up to 40°C ambient temperature, depending on wattage. Driver M-Housing is IP54 rated and Optical Chamber is IP65 rated.